| 1 |
Microbiology Laboratory Staff ( Foods Manufacturing)
- Description: Job Description The Microbiology Laboratory Technician will be responsible for setting up, operating and maintaining laboratory instruments, monitoring experiments, making observations, and calculating and recording results. Under general supervision following SOPs and special test designs, the Laboratory Technician analyzes test data, completes required documentation, and performs equipment maintenance. Incumbent should understand lab safety involving laboratory waste and be a team player. Bachelor’s Degree in Microbiology or related discipline along with knowledge and experience in general microbiology methods (serial dilutions, plating,) are required. Exposure to GMP, GLP, ISO17025. Responsibilities: • Be responsible for performing microbiological testing on raw materials, intermediates and finished products in a timely manner. • Carry out compositing function for raw material and finished product samples. • Support sampling activities as required by the sampling plan. • Carry out media preparation and maintain laboratory inventory level to support testing activities. • Perform and support environmental monitoring program. • Provide data interpretation of environmental monitoring program and finish product results to support continuous verification of aseptic line performance. • Provide technical support to the aseptic operation by establishing an environmental monitoring program for the facility, assist on trouble shooting activities related to aseptic filling, and support for validation and verification of aseptic filling performance. • Provide support for microbiological expertise for root cause analysis, verification, and validation of the aseptic filling lines. • Leadership role for people safety and development for the technical laboratory. • Perform cleaning and sanitation of laboratory premises, equipment and glassware in accordance to Standard Operating Procedure. • Organize calibration and performance check on equipment and ensure all laboratory documentation is maintained, recorded and reported accurately. • Establishing ISO/IEC 17025:2005 and improving good laboratory practices. • Interact with Corp QA by reports, participating in quarterly proficiency audit.
โดย Manpower Thailand-Eastern Seaboard Branch
|
2 |
| 2 |
MECHANICAL ENGINEER (VESSEL)
- 1. Design, vessel based on contract specification for water and wastewater treatment system, especially following international standard such as ASME, API, AWWA, AWS, etc. 2. Perform design validation during performance test. 3. Respond engineering change control 4. Review the AutoCAD drawings from AutoCAD operator. 5. Provide related technical document to fulfill customer requirement. 6. Prepare installation, operation and maintenance manual of process system. 7. Estimate cost of process and mechanical work of water and or wastewater treatment system based on the contract. 8. Plan and schedule the procurement and manufacturing of mechanical equipment. 9. Perform procurement mechanical engineering activities such as RFQ & TBE and vendor's document review. 10. Inspect and coordinate with related department of the inspection work for the selected equipment before delivery.
โดย GOSHU KOHSAN CO., LTD. บริษัท โกชู โคซัน จำกัด
|
- |
| 3 |
PROCESS ENGINEER
- 1. Design or develop of PFD and P&IDs, equipment sizing and specification of water and wastewater treatment system concerning HAZOP. 2. Perform design validation during performance test. 3. Respond engineering change control 4. Review the AutoCAD drawings from AutoCAD operator. 5. Provide related technical document to fulfill customer requirement. 6. Prepare installation, operation and maintenance manual of process system. 7. Estimate cost of process and mechanical work of water and or wastewater treatment system based on the contract. 8. Plan and schedule the procurement and manufacturing of mechanical equipment. 9. Perform procurement mechanical engineering activities such as RFQ & TBE and vendor's document review. 10. Inspect and coordinate with related department of the inspection work for the selected equipment before delivery.
โดย GOSHU KOHSAN CO., LTD. บริษัท โกชู โคซัน จำกัด
|
- |
| 4 |
Process-Validation Engineer
- รับสมัครงาน Process-Validation Engineer
โดย บริษัท ไบโอแลป จำกัด
|
3 |
| 5 |
QA.Engineer - Sr.Engineer..QA .Engineer. ( Customer Service )<marquee> Urgent!! <-marquee>
- QA.Engineer / Sr.Engineer.. 1.Product/Process Qualification Control 2.Prodution defects problem analysis QC Tool and PDCA 3. Generate Corrective action and preventive action Plan 4.IPQC , OQA , Changed implementation 5.Customer interface / satisfaction survey 6.Drive for continuous improvement 7.Product critical point process capability study and co-operate for adjust 8.Control for validation / review / development of test method , product specifications, work instructions and other quality related matter 9.Responsible and participates in the handling of non-conforming raw material and non-conforming products. 10.Planning efficiency the inspection of raw material,work-in-process. 11.Control and manage of non-conforming product at incident in process area. QA .ENGINEER. ( Customer Service ) Customer Service : 1.Advanced Customer's corrective action reply report 2.Prepare plan for product audit, quality management system audit,envionmental management audit,and safety audit 3.Summarize audit findings,propose corrective/preventive concerns including solutions 4.Follow-up on preventive and corrective actions audit and customer CAR 5.Prepare audit resulte for management review 6.Provide support and training on product standard,quality managementstandard,environmental management standard,and safety standard 7.Control and manage of non - conforming product and product return form customer. Authority : 1.Assitance QA manager response as customer visit Training need : 1.Civica's ISO/TS 16949 procedure and flow 2. Customer quality requirement implement toolsEngineer Inprocess Control.1. Product / Process Qualification Control << /span>
โดย บริษัท ซีวีก้า (ไทยแลนด์) จำกัด
|
3. . |
| 6 |
Validation Officer
- • To create/develop the validation system together with related party, to gather information on new related technologies, and then to publish them on both hard media and electrical media and make sure they are accessible • To apply the validation system to real use together with related parties both in and outside the organization, and make sure the system functions normally and up to the academic standard • To keep in check of the validation system in case there is any change on the system, together with related parties both in and outside the organization
โดย เครือเบทาโกร
|
- |
| 7 |
QA.Engineer - Sr.Engineer..QA .Engineer. ( Customer Service )<marquee> Urgent!! <-marquee>
- QA.Engineer / Sr.Engineer.. 1.Product/Process Qualification Control 2.Prodution defects problem analysis QC Tool and PDCA 3. Generate Corrective action and preventive action Plan 4.IPQC , OQA , Changed implementation 5.Customer interface / satisfaction survey 6.Drive for continuous improvement 7.Product critical point process capability study and co-operate for adjust 8.Control for validation / review / development of test method , product specifications, work instructions and other quality related matter 9.Responsible and participates in the handling of non-conforming raw material and non-conforming products. 10.Planning efficiency the inspection of raw material,work-in-process. 11.Control and manage of non-conforming product at incident in process area. QA .ENGINEER. ( Customer Service ) Customer Service : 1.Advanced Customer's corrective action reply report 2.Prepare plan for product audit, quality management system audit,envionmental management audit,and safety audit 3.Summarize audit findings,propose corrective/preventive concerns including solutions 4.Follow-up on preventive and corrective actions audit and customer CAR 5.Prepare audit resulte for management review 6.Provide support and training on product standard,quality managementstandard,environmental management standard,and safety standard 7.Control and manage of non - conforming product and product return form customer. Authority : 1.Assitance QA manager response as customer visit Training need : 1.Civica's ISO/TS 16949 procedure and flow 2. Customer quality requirement implement toolsEngineer Inprocess Control.1. Product / Process Qualification Control << /span>
โดย บริษัท ซีวีก้า (ไทยแลนด์) จำกัด
|
5. . |
| 8 |
Engineering Section Manager ( MNC - Automotive )
- Our customer is the joint venture company between Japanese & European who produce the automotive parts. Now , we are on the process of improving our capability for long term competitive in 5 years. Our job scopes are... - Apply the engineering logics to improve the productivity of mass production & new model by layout design , line balance , neck machine improvment . - Repair / modify the facilities of current machinery for more efficiency / safety or set up the parameter of program for more quickly & stable. - Set up the standardize of process / euqipment for easily to mainteannce / improvement or switching the process. - Process design for new parts for runing the mass production by using the logicis of engineering . - Coordinate with project team together with production / quality / sales team for products trial or new model launching. - Fully support to project engineer for new production trial / validation the project transfer. Note : We need the guy who work with PASSION only.
โดย C2S Recruitment Service
|
1 |
| 9 |
ผู้จัดการ - ผู้ช่วยผู้จัดการ แผนก QC
- 1. รับผิดชอบการตรวจและทดสอบ วัตถุดิบ วัสดุบรรจุ ยาระหว่างผลิต ยาสำเร็จรูป ยาทดลอง ยา Stability 2. รับผิดชอบการวิเคราะห์ยา Process Validation-Cleaning Validation 3. รับผิดชอบการวิเคราะห์ (Method Validation) (ยาเก่า) 4. รับผิดชอบงาน Calibration 5. ตรวจสอบ ยาคืน-ยารอทำลาย จากฝ่ายขาย 6. ร่วมติดตามและประเมินผู้ขายวัตถุดิบ วัสดุบรรจุ และ Out source 7. รับผิดชอบการฝึกอบรมนักวิทยาศาสตร์ พนักงานใหม่ 8. อื่น ๆ ที่ได้รับมอบหมายจากผู้บังคับบัญชา
โดย บริษัท แมคโครฟาร์ จำกัด
|
1 |
| 10 |
QA.Engineer - Sr.Engineer..<marquee> ด่วนมาก!! <-marquee>
- 1.Product/Process Qualification Control 2.Prodution defects problem analysis QC Tool and PDCA 3. Generate Corrective action and preventive action Plan 4.IPQC , OQA , Changed implementation 5.Customer interface / satisfaction survey 6.Drive for continuous improvement 7.Product critical point process capability study and co-operate for adjust 8.Control for validation / review / development of test method , product specifications, work instructions and other quality related matter 9.Responsible and participates in the handling of non-conforming raw material and non-conforming products. 10.Planning efficiency the inspection of raw material,work-in-process. 11.Control and manage of non-conforming product at incident in process area.
โดย บริษัท ซีวีก้า (ไทยแลนด์) จำกัด
|
1. . |
| 11 |
เภสัชกร QA (QA Department Supervisor)
- Essential duties: 1) Responsible to conduct the internal quality audit (IQA) as part of IQA team member 2) Follows-up the correction and CA/PA obtaining from the Internal quality audit (IQA),Nonconforming products, Corrective Action Request(CAR),Improvement Report, Customer complaint, and then reports to QA Department Manager. Related duties: 1) Develops,analyzes and summarizes cGMP technical/validation documentations,e.g.,Organization validation structure and validation master plan (VMP) by working closely with Manufacturing, Quality Assurance,Quality control,Productivity Supporting and Regulatory Affair division. 2) Maintain appropriate validation documentations, as well as, coordinate for investigation of validation troubleshoot problems and determine solutions.
โดย บริษัท ไทยนครพัฒนา จำกัด
|
2 |
| 12 |
Process - Production Engineer <marquee>Urgent!!<-marquee>
- Develop or improve production process, by review, improve or develop process flow, layout, process FMEA and process control plan including provide performance estimates to achieve company QCD objectives and/or budgetary proposals. Develop / Review process standard data sheet and formalize to production standard in order to ensure safety, quality and efficiency in each production area. Improve or participate in improvement team for production equipment Select or participate in the selection of proper supplier for tooling and equipment. Support production team in QRQC and problem solving. Support production team in operator training. Participate in quality and performance review for the new project transferred. Support project engineer in new production trail and validation Documentation to ensure right first time acceptance.
โดย Manpower Thailand-Eastern Seaboard Branch
|
1 |
| 13 |
นักวิทยาศาสตร์ Validation + calibration <marquee><font color=red>ด่วนมาก ๆ !!<-font><-marquee>
- นักวิทยาศาสตร์ วิจัยและพัฒนา 1 อัตรา
โดย บริษัท เยเนอรัล ฮอสปิตัล โปรดัคส์ จำกัด (มหาชน)
|
1 |
| 14 |
เภสัชกร
- -รับผิดชอบการประกันคุณภาพผลิตภัณฑ์และอนุมัติผ่านผลิตภัณฑ์ขั้นสุดท้ายก่อนส่งจำหน่าย -งานควบควบคุมคุณภาพ( Process Validation, CleaningValidation, จัดทำ Method Validation) -งานควบคุมคุณภาพ 2 (ดูแลด้านจุลชีวะ) -งานจัดหาและสำรอง
โดย บริษัท บางกอกแล็ป แอนด์ คอสเมติค จำกัด
|
4 |
|
|
